Millers CFS 10W60 Fully Synthetic Engine Oil

Description

Millers CFS 10W60 Fully Synthetic Engine Oil is a competition, fully synthetic petrol/diesel engine oil, and is recommended for fast road and racing use.  This grade is suited to larger race and rally engines, with or without
turbochargers, especially when subject to severe and high stress conditions. The ultra low friction, nano technology additives are successfully proven in motorcycles with wet clutches.

Millers CFS 10W60 Fully Synthetic Engine Oil

This product is formulated with 100% synthetic base fluids, and includes a synergistic blend of three esters combined with the latest additive technology for maximum performance.

APPLICATION

Use for competition, modified and high performance engines. Suitable for all normally aspirated and turbo-charged engines.  CFS 10w60 is formulated to protect both petrol and diesel competition engines operating under extreme conditions e.g. long distance racing, rallying in both normally aspirated and turbo-charged engines.

USER BENEFITS

• Provides up to a 26% reduction in friction plus a reduction in wear compared to a standard engine oil.
• Fully synthetic oils provide many outstanding performance benefits over conventional mineral oil. The synergistic blend of three esters also gives improved lubricity, thereby reducing friction and enhancing the oils performance.
• By utilising both polyalphaolefins (PAO) and ester synthetics, which have been specially selected to minimise the amount of polymer used, the lubricant film provided is more resistant to ‘shear’ and viscosity loss in high stress areas.

Fully synthetic oil provides:

• Load carrying capacity which is many times that of a mineral oil.
• High film strength for ultimate protection.
• Outstanding cold flow properties for reduced wear at start up.
• Excellent thermal stability and oxidation resistance.
• The synergistic blend of three esters gives improved lubricity, thereby reducing friction and enhancing the performance of the oil.
• CFS 10w60 is formulated to protect both petrol and diesel competition engines which operate under extreme conditions e.g. long distance racing and rallying in both normally aspirated and turbo-charged engines.

PERFORMANCE PROFILE for Millers CFS 10W60 Fully Synthetic Engine Oil

This product:

• is suitable for operating at 125°C with peak temperatures up to 150°C.
• offers exceptional protection, especially where it is subject to severe and high stress conditions.

TYPICAL CHARACTERISTICS

SAE Viscosity Grade … 10w60
Specific Gravity @ 15°C … 0.868
Kinematic Viscosity @ 100°C … 23.0cSt
Kinematic Viscosity @ 40°C … 162cSt
Viscosity Index … 171
Pour Point °C … -42
Flashpoint °C … 240
Cold Crank Viscosity cP max … 7,000
TBN mg KOH/gm … 10.0

PRODUCT SIZES

Millers CFS 10W60 Competition Engine Oil is supplied in the following sizes:  1L, 5L, 20L, 199L.

ADDITIONAL INFORMATION for Millers CFS 10W60 Fully Synthetic Engine Oil

For further information on Millers CFS 10W60 Fully Synthetic Engine Oil, and on other products for high performance vehicles, please refer to the FAQs Motorsport page on our website and our full range of Motorsport Engine oils and Nanodrive High Performance Engine oils available for purchase from our online shop.

Are Millers Motorsport engine oils different to Road Car engine oils and why?

HEALTH AND SAFETY

Health and Safety Data Sheet 7956 applies to Millers CFS 10W60 Fully Synthetic Engine Oil. When used for the purpose recommended and with due regard to the appropriate Health and Safety Data, this product should not cause any concern.  However, if you are in any doubt, please consult with Millers Oils Technical Department.